Elementor #264

1. Atwood 91365 Circuit Board Kit for Water Heaters - Use with Gas/Electric 12 VDC
  • NEWEST MODEL: Replaces Atwood 93851.
  • COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E.
  • COMBO BOARD: Controls BOTH the LP ignition and the Electric Element. Atwood part #93309 (edge pin connector) NOT included.
  • TECHNICAL SUPPORT: Atwood provides prompt support in diagnosing and resolving technical problems.
  • High Heating Power: 60K BTU heating power & a 2.4GPM capacity, Furrion RV Gas Water Heater will deliver hot water on demand at consistent temperature even when the ambient temperature drops to 32ºF.
  • Steady Temperatures: Furrion’s Vortex technology consistently mixes water to your desired temperature. Dual-sensors automatically shut power off if the temperature exceeds a safe limit.
  • Replacement Door for Suburban: Specially designed for retrofit applications and use as a replacement door for Suburban 4/6 Gallon Water Heater models. This door fits the required dimension of 16.14 x 16.14 Inches.
  • Built for the Road: Engineered for durability and performance on the road, with Furrion VibrationSmart technology and components designed to withstand intense vibration encountered by uneven terrain.
  • Warranty & Dimensions: Designed with the highest quality materials, the Furrion RV Gas Water Heater is covered by Furrion’s 2-year Warranty. Product Dimensions (W x H x D): 12.81 x 12.62 x 20.75 Inches
  • What’s in the Box:1x Water heater,1x Wall Controller,Documentation
  • 6 gallon water tank
  • 12,000 btu rating
  • Weight: 32.9 lbs
  • D- 12 Volt DC Direct Spark Ignition Gas Heating System
  • Regulates The Burner To Maintain The Set Hot Water Temperature
  • Note: Water Heater Door Is Not Included And Must Be Ordered With Girard’S 2Gwham Water Heater
  • 42,000 Btus Which Provides The Optimum Performance For An Rv’S Plumbing
  • No Special Lp Gas Lines Or Special Plumbing Required
  • The Atwood XT 10- Gallon water heater provides the equivalence of a 16- Gallon unit without increasing the space required
  • Saves weight while fitting in the same cut-out dimensions of other Atwood water heaters
  • Comes pre-configured with a winterization bypass kit, tee fittings, hoses and a thermostatically-controlled mixing valve with check valves in both inlets
  • 10 Gallon Water Heater, XT Exothermal, Gas/Electric Model
  • Water Heater Gas Electric Direct Spark Ignition
  • 10,000 BTU input
  • 6 gal. cut-out: 12-3/4″H x 12-3/4″W x 19-7/8″D
  • Anode rod not required – less maintenance
  • Electronic ignition gas burner system
  • Door not included
  • COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E. Atwood part #93309 (edge pin connector) NOT included.
  • Dimensions: 4 1/4” x 3 3/8” x 1”
  • 12V DC
  • NEWEST MODEL: Replaces Atwood 93851.
  • Does not include adapter